X Series E70 X5 3.0Si (N52K) OFFRD
Release screws (1) and remove brake caliper mounting bracket.
Installation:
Tightening torque 34 11 2AZ
.
Important!
To release brake disc: Do not under any circumstances strike
friction ring with a hammer or similar!
If necessary, carefully tap on base of brake disc chamber with
a rubber mallet.
Clean contact surface of brake disc at wheel hub thoroughly
and remove traces of corrosion.
Unevenness on contact surface may result in distortion of
brake disc!
Release screw (1) and remove brake disc (2).
Installation:
Replace screw.
Tightening torque 34 11 1AZ
.
RA Removing and installing/replacing both front brake discs
BMW AG - TIS
06.02.2013 19:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
