X Series E70 X5 3.0Si (N52K) OFFRD
Lift out retaining spring (1).
Remove cover plug (1).
Unscrew guide bolts (1).
Withdraw brake caliper backwards.
Important!
Tie brake caliper back and do not allow to hang from brake
hose.
Installation:
Tightening torque 34 21 4AZ
.
Clean guide screws only; do not grease.
Check threads.
Replace all guide screws which are not in perfect condition.
Important!
When pressing down piston, note brake fluid level in
expansion tank.
Overflowing brake fluid will damage the paintwork.
Turn piston fully back with special tool 34 1 050 .
RA Removing and installing or replacing brake pads on both rear disc brakes (Teves
BMW AG - TIS
06.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -