X Series E70 X5 3.0Si (N52K) OFFRD
Detach brake hose from brake caliper (1).
Installation:
Tightening torque 34 32 3AZ
.
Important!
Never twist brake hose when installing it and avoid all contact
with parts attached rigidly to the body.
Note:
First tighten brake hose on brake caliper.
Insert brake hose in bracket and screw onto brake pipe.
Remove brake pads.
Release screws (1).
Remove brake anchor plate in direction of arrow.
Installation:
Tightening torque 34 21 2AZ
.
RA Removing and installing/replacing left or right rear brake caliper
BMW AG - TIS
06.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
