X Series E70 X5 3.0Si (N52K) OFFRD
34 52 525
Replacing one front pulse generator
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read and comply with General Information.
Disengage cable guides (2).
Open connector housing (1), pull plug connection out of holder
and disconnect.
Pull cable with rubber grommet out of holders (3).
Installation:
Ensure proper locking of plug connector and proper seating of
rubber grommets.
Disengage cable guides (1).
Release Torx socket screw (2) and pull pulse generator (3) out
of bore.
Installation:
Tightening torque 31 51 3AZ
.
Clean bore for pulse generator and lubricate with
Staburags NBU 12/K lubricating grease .
RA Replacing one front pulse generator
BMW AG - TIS
06.02.2013 19:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
