X Series E70 X5 3.0Si (N52K) OFFRD
34 52 535
Replacing a rear pulse generator
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Partially detach rear wheel arch trim
•
Read and comply with General Information.
Open housing cover (1).
Disconnect plug connection (2).
Installation:
Ensure proper locking of the plug connector and proper seating of
the cable in the brackets.
Disengage cable (1) along marked lines from holders.
Installation:
Ensure proper locking of the holders and proper seating of the
cable in the holders.
RA Replacing a rear pulse generator
BMW AG - TIS
06.02.2013 19:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -