X Series E70 X5 3.0Si (N52K) OFFRD
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact face with universal cleaner, refer to BMW
Parts Service.
Note:
If there are grease residues in the area of the wheel stud
bore, the brake disc must be removed and cleaned.
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact face with universal cleaner, refer to BMW
Parts Service.
Check brake disc retaining bolt (1) for secure seating.
Important!
Mounting bolt (1) must not under any circumstances protrude
over contact surface (2) between brake disc and disc wheel.
Tightening torque brake disc retaining bolt:
Front axle, 34 11 1AZ.
Rear axle 34 21 1AZ.
Apply a thin coat of grease to wheel centering (1) in disc wheel.
Note:
Refer to BMW Service Operating Fluids, Main Group 36.
RA Removing or installing front or rear wheel
BMW AG - TIS
06.02.2013 20:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -