X Series E70 X5 3.0Si (N52K) OFFRD
34 52 550
Removing and installing/replacing DSC yaw
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Do not kink floor panelling under any circumstances!
Necessary preliminary tasks:
•
Remove right front seat
•
Lift floor panelling and fold back to one side
Remove floor inlay (2).
Release screws.
Tightening torque 34 51 2AZ
.
Disconnect plug connection and remove yaw sensor (1).
RA Removing and installing/replacing DSC yaw sensor
BMW AG - TIS
06.02.2013 20:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -