X Series E70 X5 3.0Si (N52K) OFFRD
37 14 610
Removing and installing / replacing
transversal-acceleration sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Do not kink floor panelling under any circumstances!
Necessary preliminary tasks:
•
Remove right front seat
•
Lift carpet and fold back to one side
•
Remove floor inlay
Release nuts (1), disconnect plug connection (2) and remove
lateral acceleration sensor (3).
Installation:
Replace self-locking nuts.
Tightening torque 37 14 7AZ
.
RA Removing and installing / replacing transversal-acceleration sensor
BMW AG - TIS
06.02.2013 20:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
