X Series E70 X5 3.0Si (N52K) OFFRD
Disconnect plug connections (1-3).
Disconnect quick-connect coupling (4) and seal both lines with
adhesive tape.
Release banjo bolts (1, 2).
Lay pipes to one side and seal off with adhesive tape.
Installation:
Check banjo bolts for dirt, clean if necessary. Then carefully screw
in banjo bolts by hand to avoid damaging the plastic threads and
with it the air supply unit.
Tightening torque 37 12 1AZ
.
Unscrew nuts (1).
Remove air supply unit (2).
Installation:
Replace self-locking nuts.
Tightening torque 37 22 1AZ
.
After installation:
•
Activate and fill air suspension system
RA Replacing air supply unit
BMW AG - TIS
06.02.2013 20:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -