X Series E70 X5 3.0Si (N52K) OFFRD
41 11 150
Side member cover
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 150).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) B-pillar with entrance
-
(2) Shaped part, entrance, outer (not shown)
Mark severance cuts in accordance with specified measurements and cut.
RA Side member cover
BMW AG - TIS
06.02.2013 21:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -