X Series E70 X5 3.0Si (N52K) OFFRD
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer plate only for following severance cuts.
Measurement a = 160 mm from roof edge.
Measurement b = 80 mm below severance cut a.
Measurement c = approx. 150 mm before hole dia. 25 mm.
Open weld joints in areas (1) and (2).
Installation:
Sheet panel (4) is needed again to seal cowl.
Apply window glass adhesive to cavity acoustic baffles (3).
Bond and rivet new part in area (2).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (2).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
06.02.2013 21:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
