X Series E70 X5 3.0Si (N52K) OFFRD
Important!
Cut outer metal sheet only.
Measurement a = approx. 200 mm from middle of lower lock striker screw point.
Measurement b = approx. 420 mm from centrepoint of hole dia. 20 mm.
Open weld joints in areas (1) and (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcing panels at all severance cuts.
-
Bond and rivet new part in area (3).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (3).
Open adhesive joints in areas (1) and (2).
Open weld joint in area (1).
Installation information:
Welding spot is omitted from area (1).
Glue new part in areas (1) and (2).
Apply window glass adhesive to cavity acoustic baffle (3).
RA Replacing rear left side panel (partial replacement, door opening)
BMW AG - TIS
06.02.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -