X Series E70 X5 3.0Si (N52K) OFFRD
41 61 014
Adjusting engine bonnet/hood
Important!
Do not damage adjoining body parts.
Minor corrections (realignment work) are permitted if the
existing adjustment options are not sufficient.
Note:
Observe gap dimensions.
Carry over schematic representation to the relevant vehicle type.
Slacken nuts (1) of hinges on left and right.
Hood lid must be able to be moved.
Tightening torque 41 61 1AZ
.
Note:
If the adjustment range is not sufficient, release retaining
screws of engine hood hinge on body and move hinge.
Tightening torque 41 61 2AZ
.
Retaining hooks must snap into place in locks.
Adjust engine hood.
Note:
Vertical adjustment of engine hood to side panel by means of stop
pads.
RA Adjusting engine bonnet/hood
BMW AG - TIS
06.02.2013 21:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -