X Series E70 X5 3.0Si (N52K) OFFRD
Note:
Adjust height of hood/bonnet to front bumper by turning nuts (1)
on retaining hooks.
If adjustment is necessary, remove front grille.
Do not slacken nut (2).
Adjust hood/bonnet by turning spacers (1) on both sides.
Important!
Check function of retaining hook.
After installation:
•
Tighten all screws and nuts to specified torque.
•
Touch up unpainted surfaces in the appropriate colour.
•
If necessary, adjust front side panels.
RA Adjusting engine bonnet/hood
BMW AG - TIS
06.02.2013 21:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -