X Series E70 X5 3.0Si (N52K) OFFRD
51 12 825
Removing and installing/replacing guide for
rear centre bumper
Necessary preliminary tasks:
•
Remove rear bumper trim
Unclip outer support (1) and remove.
Installation:
Make sure support is correctly seated.
If necessary, disconnect plug connection (1) from aerial for
comfort access.
Unscrew nuts (2).
Feed out guide (3) towards bottom.
Tightening torque 51 12 5AZ
.
RA Removing and installing/replacing guide for rear centre bumper
BMW AG - TIS
06.02.2013 21:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
