X Series E70 X5 3.0Si (N52K) OFFRD
51 16 372
Removing and installing/replacing lower
glovebox lid
Necessary preliminary tasks:
•
Remove glovebox
Close glovebox lid.
Release tab washer (1) and remove pin (2).
Installation:
Replace tab washer (1) and pin (2).
Drive out shaft (1) in direction of arrow until knurled area (2) is
exposed.
Pull out shaft (1) completely and remove glovebox lid.
Installation:
Check that shaft (1) is securely seated.
If necessary, fit flap fastening set.
Installation:
If necessary, replace faulty bushings (1).
Markings (2) on bushing (1) and glovebox lid (3) must line up.
RA Removing and installing/replacing lower glovebox lid
BMW AG - TIS
06.02.2013 22:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
