X Series E70 X5 3.0Si (N52K) OFFRD
51 48 060
Removing and installing/replacing sound
insulation in left or right front door
Necessary preliminary tasks:
•
Remove door trim panel
Using a scalpel, cut through sealing bead (1) completely of if
necessary partially.
Feed out sound insulation (3) at cable (2) and remove.
Installation:
Ensure clean bonding and that there are no leaks at sealing bead.
Installation:
In case of replacement or partial detachments, lay butylene tape
(sourcing reference: BMW Parts Service) depending on the
conditions on inner door panel or sound insulation.
Seal cable penetrations with butylene tape.
Note:
Position of butylene tape (1) on sound insulation (2).
RA Removing and installing/replacing sound insulation in left or right front door
BMW AG - TIS
06.02.2013 23:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
