bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Removing And Installing_replacing Both Tension Struts On Spring Strut Domes > < 9 RA Removing And Installing_replacing Rear Left Or Right Wheel Arch Cover
Page 1
background image

51 71 099

Removing and installing/replacing radiator air
guide

Necessary preliminary tasks:

Remove carrier for bumper trim at front 

Release expansion rivets (1).

Release catch (2) and remove intake duct (3) towards top.

Disconnect plug connections (1, 2).

Unclip hose (3) and feed out air duct towards top.

Replacement:

Modify all rubber seals (1) and sheet nuts (2) on air duct,
replace if necessary. 

Modify outside temperature sensor (3).

Optional extra: 

Modify air flap control.

RA  Removing and installing/replacing radiator air guide

BMW AG - TIS

06.02.2013  23:55

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Removing And Installing_replacing Both Tension Struts On Spring Strut Domes > < 9 RA Removing And Installing_replacing Rear Left Or Right Wheel Arch Cover