bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing_replacing Rear Spoiler|Page 1900 > < 11 RA Removing And Installing_replacing Both Tension Struts On Spring Strut Domes
Page 1
background image

51 71 412

Removing and installing/replacing rear
spoiler

Special tools required:

51 0 010

Necessary preliminary tasks:

Remove trim for rear window frame

Release screws (1) with washers (2).

Unscrew nuts (3).

Lever out seal plugs (4) and release nuts underneath.

Tightening torque 51 71 1AZ

.

Disconnect plug connections (1 and 5).

Disconnect hose (2).

Raise rear spoiler slightly and feed out grommets (3 and 4).

Remove rear spoiler.

Installation:

Make sure grommets (3 and 4) are correctly seated

RA  Removing and installing/replacing rear spoiler

BMW AG - TIS

06.02.2013  23:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing_replacing Rear Spoiler|Page 1900 > < 11 RA Removing And Installing_replacing Both Tension Struts On Spring Strut Domes