X Series E70 X5 3.0Si (N52K) OFFRD
Installation:
Always replace clips (1).
Following parts must not be damaged or missing:
(2)
2 x felt (12 x 20 mm)
(3)
Studs (for adjusting rear spoiler)
(4)
Slide element
Installation:
Rear spoiler must be secured with cable tie (1) to outer slide
elements (2) on left and right.
Retrofit if necessary.
Replacement:
Modify auxiliary brake light.
Adjusting rear spoiler:
Observe gap dimensions.
Press on rear spoiler (1) and measure negative protrusion of rear
spoiler (1) to rear window (2) with special tool
51 0 010 .
A= 1
±
1 mm
If necessary, adjust rear spoiler (1) by means of stud (3).
RA Removing and installing/replacing rear spoiler
BMW AG - TIS
06.02.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -