bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing Or Replacing Panel For Cover On Left Or Right Side Membe|Page 1903 > < 13 RA Removing And Installing_replacing Support Parts For Panel For Cover On Left Or R
Page 1
background image

51 71 447

Removing and installing or replacing panel
for cover on left or right side member

Release expander rivets (1) on wheel arch trim at rear.

Detach trim (2) at clip (3).

Release screws (4).

Installation:

Replace expander rivets (1).

If necessary, replace faulty clip (3).

Release clips (1) and screw (2).

Installation:

If necessary, replace faulty clips (1).

Fit clips (1) with O-rings.

Unclip panel (1) in area (A).

Open doors, detach panel (1) at clips (2) and remove in direction
of arrow.

Installation:

If necessary, replace faulty clips (2).

Fit clips (2) with O-rings.

Installation:

Catches (1) on holder (2) must not be damaged.

RA  Removing and installing or replacing panel for cover on left or right side membe

BMW AG - TIS

06.02.2013  23:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing Or Replacing Panel For Cover On Left Or Right Side Membe|Page 1903 > < 13 RA Removing And Installing_replacing Support Parts For Panel For Cover On Left Or R