X Series E70 X5 3.0Si (N52K) OFFRD
51 71 478
Removing and installing/replacing trim on
rear left or right wheel arch
Special tools required:
•
00 2 240
•
00 2 242
Release blind rivets (1).
Release trim (2) at clips (3) and remove.
Installation:
Apply blind rivets (1) with special tool 00 2 240 and adapter
00 2 242 .
Ensure trim (2) is correctly seated.
Installation:
Catches (1) must not be damaged
If necessary, replace faulty clips (2).
Fit clips (2) with sealing ring.
RA Removing and installing/replacing trim on rear left or right wheel arch
BMW AG - TIS
06.02.2013 23:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
