bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Top Left Steering Gear Cover > < 3 RA Removing And Installing_replacing Assembly Compartment Partition Wall
Page 1
background image

51 71 ...

Removing and installing/replacing bottom left
or right steering gear cover

Important!

Observe safety instructions for raising the vehicle

Release bolts (1) for assembly underside protection at front.

Release screws (2) and expander rivets (4)

Remove cover (3).

Installation:

Replace damaged expander rivets.

Make sure cover is correctly positioned.

Important!

Make sure all covers in wheel arch are correctly seated in
relation to each other:

Rear cover (1) overlaps front cover (2)

Cover (4) overlaps rear cover (1)

Cover (3) overlaps covers (2, 4) and rear cover (1) in
area (A)

Left side only:

Rear cover (1) overlaps cover (3) in area (B).

RA  Removing and installing/replacing bottom left or right steering gear cover

BMW AG - TIS

06.02.2013  23:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Top Left Steering Gear Cover > < 3 RA Removing And Installing_replacing Assembly Compartment Partition Wall