bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing Left Or Right Front Seat|Page 1948 > < 6 RA Removing And Installing Left Or Right Front Seat
Page 2
background image

Removing cover on left and right:

Move front seat towards rear.

Carefully raise lug (1).

At same time, unlock inner side (2) in direction of arrow.

Remove cover in direction of arrow towards front.

Release bolts (1).

Installation:

Replace screws.

Tightening torque  52 10 01AZ

.

Installation:

Carpet must not project between seat rail and floor board in area
of screw-down points (grinding noises).

Unclip cover (1) towards front.

Unfasten plug connection (2) and disconnect.

Unclip wiring harness from seat mechanism.

Important!

Cover door sill with protective covers (risk of damage).

Lift out front seat.

RA  Removing and installing left or right front seat

BMW AG - TIS

07.02.2013  00:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

6 RA Removing And Installing Left Or Right Front Seat|Page 1948 > < 6 RA Removing And Installing Left Or Right Front Seat