X Series E70 X5 3.0Si (N52K) OFFRD
52 26 ...
Removing and installing pivot bearing trim
(40 % rear seat)
Necessary preliminary tasks:
•
Remove middle slide trim at top only
•
Remove inner follower trim
•
Partially remove backrest cover
Release screws (1).
Release screw (1).
Tightening torque: 52 26 27AZ
.
Unclip trim (2) in marked area.
Carefully tighten follower (3) on seat cushion frame.
Feed trim (2) out of seat mechanism.
RA Removing and installing pivot bearing trim (40 % rear seat)
BMW AG - TIS
07.02.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
