X Series E70 X5 3.0Si (N52K) OFFRD
52 26 ...
Removing and installing/replacing FOLD
microswitch
Necessary preliminary tasks:
•
Remove backrest cover
•
Remove trims from backrest frame, outer
Unclip microswitch (1) from seat backrest frame.
Installation:
Make sure contact sensor (2) is fitted correctly on pin (1).
RA Removing and installing/replacing FOLD microswitch
BMW AG - TIS
07.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
