X Series E70 X5 3.0Si (N52K) OFFRD
Detach rear panel (2) with flat scraper (1) from rear seat back.
Installation:
Comply with instructions issued by manufacturer of universal
spray adhesive.
Apply universal spray adhesive to rear panel and rear seat back.
Fit and align rear panel within the air drying time (see
manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from
slipping.
RA Removing and installing/replacing rear panel on right rear seat back
BMW AG - TIS
07.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
