X Series E70 X5 3.0Si (N52K) OFFRD
52 30 303
Removing and installing/replacing actuating
mechanism for rear seat backrest
Necessary preliminary tasks:
•
Remove backrest cover
Unclip trim (1) and feed out from release lever (2).
Installation:
Retaining lugs must not be damaged.
If necessary, replace faulty trim (1).
Press in detent lugs and remove release unit (1).
Disengage Bowden cable sleeve (1) from actuating unit (2).
RA Removing and installing/replacing actuating mechanism for rear seat backrest
BMW AG - TIS
07.02.2013 01:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
