X Series E70 X5 3.0Si (N52K) OFFRD
Open Velcro-type fastener in marked area.
Detaching cover and padding:
•
Release all retainers in marked area
•
Remove cover from padding
•
Remove all remnants of retainers from cover and padding
Installation:
Insert new retainer (2) with special tool 52 0 050 and bend
closed.
1.
Padding
2.
Retainer
3.
Trim wire in padding
4.
Trim wire in seat cover
5.
Backrest cover
Replacing cover:
•
Pull all trim wires out of backrest cover
•
If necessary, cut pockets for trim wires in new backrest cover
•
Push trim wires into backrest cover pockets
RA Removing and installing/replacing backrest cover for left or right rear seat
BMW AG - TIS
07.02.2013 01:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
