X Series E70 X5 3.0Si (N52K) OFFRD
Make sure catch of fastener for wind deflector is correctly seated and engaged.
Feed centering element for wind deflector (1) in direction of arrow
out of opening (2) in guide (3).
Using a suitable tool (2), disengaged spring (1) of fastener
for wind deflector (3) in direction of arrow.
Installation:
•
Check guide for cleanness, remove foreign bodies/dirt if
necessary
•
Make sure spring is correctly seated on fastener for wind
deflector
RA Replacing fastener for wind deflector on left or right
BMW AG - TIS
07.02.2013 01:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -