bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Battery|Page 2334 > < 3 RA Performing Battery _power Reset_ (for Programming_coding Control Unit(s))
Page 1
background image

61 21 010

Removing and installing/replacing battery

Warning!

Observe safety instructions for handling vehicle battery.

Notes and instructions on Intelligent Battery Sensor IBS.

 

Important!

Do not under any circumstances pull/lever safety battery
terminal off by force.

Necessary preliminary tasks:

Disconnect negative battery cable

Remove distribution box

Detach vent (1) in direction of arrow.

Unlock positive terminal cover (2).

Slacken nut (3) of safety battery terminal.

Tightening torque 61 21 1AZ

.

Detach safety battery terminal towards top, lay to one side and
secure.

Release threaded pin (4).

Release screw (6) and remove holder.

Release screw (5) and remove holder.

Lift out battery.

Installation:

Make sure battery is correctly seated in associated fixture.

RA  Removing and installing/replacing battery

BMW AG - TIS

07.02.2013  02:22

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Battery|Page 2334 > < 3 RA Performing Battery _power Reset_ (for Programming_coding Control Unit(s))