X Series E70 X5 3.0Si (N52K) OFFRD
61 31 334
Removing and installing or replacing grip trim
for gear selector switch
Special tools required:
•
64 1 030
Turn end ring (1) in direction of ring and lower.
Insert special tool 64 1 030 from below into trim (1) and
carefully pull off trim (1).
Remove symbol plate (2).
Installation:
To facilitate fitting, secure pushbutton (3) with adhesive tape on
trim (1).
RA Removing and installing or replacing grip trim for gear selector switch
BMW AG - TIS
07.02.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -