X Series E70 X5 3.0Si (N52K) OFFRD
61 31 008
Removing and installing/replacing steering
column switch cluster (SZL)
Warning!
Move wheels into straight-ahead position and do not alter this
position during the repair work.
Do not under any circumstances turn the steering column
switch cluster when the steering wheel is removed.
Necessary preliminary tasks:
•
Remove steering wheel
•
Remove lower section of steering column trim
•
If necessary, remove switch for steering column adjustment
Warning!
Secure volute spring cassette (1) against rotating with
adhesive tape (2).
If unauthorized rotation of volute spring cassette (1) cannot
be ruled out, it is essential to return volute spring cassette (1)
to centre position.
•
Turn volute spring counterclockwise as far as it will go.
•
Turn volute spring clockwise as far as it will go.
•
Turn volute spring back to centre position and secure so
that centring pin (3) is at bottom position.
Disconnect plug connection (1).
RA Removing and installing/replacing steering column switch cluster (SZL)
BMW AG - TIS
07.02.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
