X Series E70 X5 3.0Si (N52K) OFFRD
Installation:
Adjust position of wiper arm in question in rest position (measured
between wiper lip and top edge of cowl panel cover).
Then tighten down wiper arm and check adjustment dimensions of
relevant wiper arm again.
Reference points (A, B) are the mountings of the wiper blades on
the wiper arms to the sealing lip (1) of the cowl panel.
Contact angle (C) is the angle between wiper blade centre
plane (2) and windscreen.
Tightening torque 61 61 11AZ
.
RA Removing and installing/replacing left or right windscreen wiper arm
BMW AG - TIS
07.02.2013 03:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -