X Series E70 X5 3.0Si (N52K) OFFRD
Release screw (1) and remove refrigerant lines with cover (1)
and associated seal.
Tightening torque 64 53 2AZ
.
Replace sealing rings and moisten with refrigerant oil.
Important!
Connections must not be mixed up!
Mark connection sequence of water hoses prior to removal.
Release hose clamps (1) and detach water hoses.
Release nut (1) and nut (2) underneath.
Tightening torque 64 11 4AZ
.
Release screws (1) and remove windscreen air guide (2).
RA Removing and installing/replacing heater
BMW AG - TIS
07.02.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
