X Series E70 X5 3.0Si (N52K) OFFRD
Recycling:
Carry out the cleaning operation in a suitable washing bay as the
emerging cleaning agent escapes through the drain openings in
the transmission tunnel.
After completing cleaning, allow car to drip-dry for approx. 5
minutes.
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Move steering column in "top" and "extended" position.
•
Remove evaporator temperature sensor
Note:
Direction arrows on special tool 64 1 300 must point in direction
of travel.
Insert guide lug (1) of special tool
64 1 300 into opening of
evaporator temperature sensor.
Guide lug (1) must be firmly seated in opening of evaporator
temperature sensor.
Connect special tool 64 1 300 to spray apparatus.
Move special tool 64 1 300 inwards.
Release clamping screw (2) and pull out guide wire (1) in order
to position the folding spray element vertically.
Apply cleaning agent uniformly to evaporator by carefully moving
special tool 64 1 300 back and forth.
RA Cleaning evaporator
BMW AG - TIS
07.02.2013 04:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
