X Series E70 X5 3.0Si (N52K) OFFRD
64 51 525
Removing and installing or replacing
expansion valve
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system
Necessary preliminary tasks:
•
Remove double pipe
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
Remove gasket (1).
Installation:
Observe direction arrows (2) without fail.
If necessary, replace damaged seal (1).
RA Removing and installing or replacing expansion valve
BMW AG - TIS
07.02.2013 04:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
