bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2675 > < 8 RA Replacing Safety Pressure Switch|Page 2673
Page 1
background image

64 53 551

Removing and installing or replacing
condenser for A/C system

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Follow safety instructions for handling refrigerant oil.

Avoid contact with refrigerant and refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove intake duct

Remove radiator cover

Slacken screws (1) on both sides and pull fan cowl upwards.

RA  Removing and installing or replacing condenser for A/C system

BMW AG - TIS

07.02.2013  04:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2675 > < 8 RA Replacing Safety Pressure Switch|Page 2673