bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
9 RA Removing And Installing_replacing Trim For Rear Cabin Monitor Base At Front And > < 7 RA Removing And Installing Replacing Central Information Display (CID)

X Series E70 X5 3.0Si (N52K) OFFRD

Page 1
background image

65 50 121

Removing and installing rear cabin monitor
(complete)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

•

Remove fresh-air grille in rear cabin

•

Remove trim for rear cabin monitor base at front and rear

Release screws (1) and remove rear cabin monitor with
holder (2).

Disconnect associated plug connections and feed out leads.

Tightening torque 65 52 1AZ

.

Installation:

Ensure correct cable routing (1) on both sides.

RA  Removing and installing rear cabin monitor (complete)

BMW AG - TIS

07.02.2013  04:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Trim For Rear Cabin Monitor Base At Front And > < 7 RA Removing And Installing Replacing Central Information Display (CID)