X Series E70 X5 3.0Si (N52K) OFFRD
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove distribution box
Feed out emergency release mechanism (1).
Slacken screws (2)
Feed out servodrive (3) in direction of arrow and disconnect
associated plug connection.
Installation:
Turn sleeve (1) with a suitable tool (e.g.: pointed pliers) approx.
45
°
in direction of arrow and pull out of cover housing (2).
Installation:
Slide sleeve (1) over locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
07.02.2013 05:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -