X Series E70 X5 3.0Si (N52K) OFFRD
72 11 101
Removing and installing/replacing rear centre
seat belt
Necessary preliminary tasks:
•
Partially remove backrest cover
Release screw (1).
Tightening torque: 72 11 26AZ
.
Remove end fitting.
Installation:
End fitting is coded against incorrect assembly.
Unclip retainers (1) for belt pin on left and right.
Remove belt pin (2).
Unscrew nut (3).
Tightening torque 72 11 25AZ
.
Remove retractor mechanism.
Installation:
Retractor mechanism is coded against incorrect assembly.
Feed anchor fitting out of backrest cover and backrest frame.
RA Removing and installing/replacing rear centre seat belt
BMW AG - TIS
07.02.2013 05:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -