X Series E70 X5 3.0Si (N52K) OFFRD
72 11 050
Removing and installing/replacing front
anchor fitting tensioner (driver's seat only)
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Improper handling can lead to triggering of the pyrotechnical
seat belt pretensioner or side airbag, resulting in injuries.
Switch off ignition!
Necessary preliminary tasks:
•
Remove upper rail trim
Detach cable tie.
Installation:
Replace faulty cable ties.
Plug connection must not be under tension.
Unlock plug connection (1) and disconnect.
Release screw (2).
Tightening torque: 72 11 06AZ
.
Remove anchor fitting tensioner.
Release screw (1).
Tightening torque: 72 11 07AZ
.
Remove lockplate.
Pull strap (2) out of anchor fitting tensioner.
RA Removing and installing/replacing front anchor fitting tensioner (driver's seat
BMW AG - TIS
07.02.2013 05:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
