X Series E70 X5 4.8i (N62TU) OFFRD
37 14 512
Replacing rear ride-height sensor
Important!
Observe safety instructions for raising the vehicle
Note:
Ride-height sensor holder on rear axle carrier 37 14 2AZ
.
Jointed rod on swinging arm 37 14 6AZ
.
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Installation:
Sensor lever (3) must point from ride-height sensor to respective
rear wheel.
Replace self-locking nut.
Tightening torque 37 14 4AZ
.
Release screws (1) and remove ride-height sensor (2).
Tightening torque 37 14 3AZ
.
RA Replacing rear ride-height sensor
BMW AG - TIS
08.02.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -