X Series E83 X3 2.0d (M47T2) OFFRD
11 53 000
Removing and installing or replacing coolant
thermostat (M47TU / M47T2)
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Bolted charge air hoses must be fitted dry and free from
grease.
Necessary preliminary tasks:
•
Remove acoustic cover.
•
Detach upper charge air hose.
•
Drain off and top up coolant.
•
Remove and install A/C compressor drive belt.
•
Remove and install alternator drive belt.
Release clamp (1) on EGR pipe.
Release screw (2).
Release screws (3) and press heat shield in direction of arrow.
Remove EGR pipe.
Detach heater delivery line.
Note:
In car with automatic transmissions, remove EGR cooler.
Lever out lock (1)
Lever out lock (2)
Installation:
Refer to general instructions for work on cooling system.
Release screws (3) on thermostat housing. Remove thermostat
housing.
RA Removing and installing or replacing coolant thermostat (M47TU / M47T2)
BMW AG - TIS
04.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -