X Series E83 X3 2.0d (M47T2) OFFRD
Important!
Fit charge air hoses dry and without grease.
Seal openings on turbocharger with a cap immediately.
Unscrew hollow union bolt.
Tightening torque 11 65 2AZ
.
Disconnect oil line (1).
Note:
Seal connection of oil line and bore in crankcase with a cap.
Installation:
Align oil line (1) centrally.
Replace seals.
Check oil level and top up if necessary.
Unlock plug (1) and remove.
Unfasten screws.
Remove holder (1).
RA Removing and installing or replacing exhaust turbocharger (M47T2)
BMW AG - TIS
04.02.2013 10:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -