X Series E83 X3 2.0d (M47T2) OFFRD
Release screws (1) and remove cover (2) from left side of fuel
tank.
Release screw cap with special tool 16 1 020 and remove.
Installation:
Tightening torque 16 14 2AZ
.
Installation:
Service cap can only be installed in one position.
When installing, make sure lug (1) of service cap engages in
corresponding opening (2) on fuel tank.
During torque tightening, notch (3) on screw cap can be clearly
heard and felt to engage toothed segment (4) on fuel tank.
Always replace seal (2).
Important!
Make sure that tab (1) of adapter ring lies completely in
recess (2).
RA Removing and installing or replacing fuel gauge sensor (diesel, left)
BMW AG - TIS
04.02.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
