X Series E83 X3 2.0d (M47T2) OFFRD
Installation:
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight, refer to
BMW Parts Service.
Note:
Illustration similar
Insert special tool 22 1 014 with pins into openings of rubber
mount.
Draw in rubber mount with special tools 22 1 014 / 22 1 021
/ 33 3 144 and nut (1).
Nut (1) = M12x1.5
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
04.02.2013 12:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
