X Series E83 X3 2.0d (M47T2) OFFRD
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Unlock bearing pin (1) in direction of arrow and remove.
Lift out shift arm.
Installation:
Grease bearing pins (1).
Grease, refer to BMW Service Operating Fluids.
Note:
Illustrations show E60.
Lift off retainer (1).
Disconnect shift rod (2).
Installation:
Grease shift rod.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
Release screws.
Tightening torque 23 00 1AZ
.
RA Removing and installing transmission (GS6-37DZ)
BMW AG - TIS
04.02.2013 12:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
