X Series E83 X3 2.0d (M47T2) OFFRD
32 31 102
Replacing steering spindle sleeve
Necessary preliminary tasks:
•
Remove lower section of steering spindle
•
Remove trim for pedal assembly
Press crash disk (2) off crash sleeve (1).
Open crash sleeve (1) slightly and remove from upper steering
spindle (3).
Slide upper steering spindle (3) into steering column.
Remove crash disk (2).
Installation:
Replace crash sleeve (1).
Unscrew nuts (1).
Remove sleeve bracket (2).
Installation:
Replace self-locking nuts.
Tightening torque 32 31 10AZ
.
Remove sleeve from bulkhead.
Installation:
Make sure sleeve is correctly seated in relation to opening in
bulkhead.
RA Replacing steering spindle sleeve
BMW AG - TIS
04.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
