X Series E83 X3 2.0d (M47T2) OFFRD
34 31 505
Removing and installing/replacing master
brake cylinder for DSC
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove expansion tank.
Unfasten brake lines (1).
Installation:
Note changed tightening torque.
Tightening torque 34 32 6AZ
.
Release nuts (2) and pull brake master cylinder (3) in direction
of arrow straight out of brake booster.
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ
.
Installation:
Replace O-ring (1).
RA Removing and installing/replacing master brake cylinder for DSC
BMW AG - TIS
04.02.2013 18:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
